Quantifying the target state of forest stands managed with the continuous cover approach – revisiting Möller's “Dauerwald” concept after 100 years

https://www.sciencedirect.com/science/article/pii/S2666719320300042
16/07/2020

Continuous cover forestry is often considered a management alternative to age-class forestry, in closer compliance with economic as well as societal demands. It is further thought to provide forest stands of high stability and resilience under conditions of climate change. The guiding principle for the stand structure of continuous cover forestry systems is to create managed forest stands that are multi-layered and hence of high structural diversity. Past studies of both these characteristics have been mostly qualitative. Here we used data from terrestrial laser scanning (TLS) to quantify differences in stand structure between forests managed for decades according to the continuous cover concept and forests managed otherwise. We found that the vertical distribution of plant material in the continuous cover stands was relatively homogeneous and similar to the vertical distribution found in primary European beech forests. We also found that the structural complexity of continuous cover forests was significantly higher than that of even-aged monocultures of Scots pine and Norway spruce. Based on these findings, a scaled index was developed that quantifies structural attributes of TLS point clouds and can significantly distinguish continuous cover forests from even-aged forests. This index may be a useful tool to quantify the difference in structure of a given continuous cover forest stand from a “target structure”, meaning the theoretical structure describing an ideal continuous cover forest.

Stiers, M., Annighöfer, P., Seidel, D., Willim, K., Neudam, L. and Ammer, C., 2020. Quantifying the target state of forest stands managed with the continuous cover approach–revisiting Möller's" Dauerwald" concept after 100 years. Trees, Forests and People, p.100004.
Stand Structure Mixed Conservation
https://academic.oup.com/forestscience/article-abstract/66/2/202/5672697
16/07/2020

We analyze economically optimal continuous cover forestry with dead wood as a biodiversity indicator. We study mixed-species stands consisting of Norway spruce (Picea abies L. Karst.), birch (Betula pendula Roth.), and other broadleaves (e.g., oak Quercus sp., maple Acer sp.). The analysis is based on an economic description of continuous cover forest management using an empirically estimated size-structured transition matrix model. We use size-specific decomposition rates for dead wood, with the lower limit on total dead wood volume varying between 0 and 40 m3 ha–1. The optimization problem is solved in its general dynamic form using gradient-based interior point methods. Increasing the dead wood volume requirement affects total stand density only slightly, but increases stand heterogeneity as other broadleaves are grown in higher numbers. In addition, increasing the dead wood requirement has only a minor effect on the total felled volume, but harvests shift from timber harvests to biodiversity fellings to maintain the required dead wood volume. In the optimal steady state with a high dead wood requirement, two harvesting cohorts emerge: one for timber harvests and the other for biodiversity fellings. Increasing the dead wood requirement decreases steady-state net timber income by up to 30 percent compared to the unconstrained solution.

Janne Rämö, Aino Assmuth, Olli Tahvonen, Optimal Continuous Cover Forest Management with a Lower Bound Constraint on Dead Wood, Forest Science, Volume 66, Issue 2, April 2020, Pages 202–209,

Monitoring Mixed Harvesting Economics
https://www.mdpi.com/2072-4292/12/13/2115
09/06/2020

Transformation to Continuous Cover Forestry (CCF) is a long and difficult process in which frequent management interventions rapidly alter forest structure and dynamics with long lasting impacts. Therefore, a critical component of transformation is the acquisition of up-to-date forest inventory data to direct future management decisions. Recently, the use of single tree detection methods derived from unmanned aerial vehicle (UAV) has been identified as being a cost effective method for inventorying forests. However, the rapidly changing structure of forest stands in transformation amplifies the difficultly in transferability of current individual tree detection (ITD) methods. This study presents a novel ITD Bayesian parameter optimisation approach that uses quantile regression and external biophysical tree data sets to provide a transferable and low cost ITD approach to monitoring stands in transformation. We applied this novel method to 5 stands in a variety of transformation stages in the UK and to a independent test study site in California, USA, to assess the accuracy and transferability of this method. Requiring small amounts of training data (15 reference trees) this approach had a mean test accuracy (F-score = 0.88) and provided mean tree diameter estimates (RMSE = 5.6 cm) with differences that were not significance to the ground data (p < 0.05). We conclude that this method can be used to monitor forests stands in transformation and thus can also be applied to a wide range of forest structures with limited manual parameterisation between sites

Monitoring Transformation Temperate
https://www.nrcresearchpress.com/doi/abs/10.1139/cjfr-2020-0056
01/05/2020

We study the management of mixed-species boreal forests and tree species composition in a stand-level economic-ecological, size-structured model. The model includes ecological tree species interaction, a detailed harvesting cost module, optimal harvest timing, and optimization between continuous cover and rotation forestry. Optimization is solved applying a tri-level structure, in which the optimal rotation is the highest-level, harvest timing the middle-level, and thinning intensity the lowest-level problem. Given realistic regeneration costs and a 3% interest rate, continuous cover forestry is optimal and may include up to a 40% fraction of broadleaves. A low interest rate and low regeneration cost together with the presence of light-demanding Scots pine favours rotation forestry. Eurasian aspen decreases the bare land value but is optimal to fell without utilization only when it has no commercial value. Overyielding in terms of cubic metre output does not reveal the economically preferable species combination. Managing single-species stands by removing naturally regenerated other species decreases the economic outcome by 35-44%. Felling noncommercial trees without utilization shows that the economically optimal solution avoids “high-grading”. Maintaining the number of large-diameter trees beyond the level that maximize profitability implies only minor losses. Omitting thinning decreases the bare land value up to 73%.

Mixed Boreal Harvesting Economics Stand Structure

19/04/2020
https://www.nrcresearchpress.com/doi/abs/10.1139/cjfr-2019-0431
16/04/2020

Forest management, characterized in many northern countries by the predominance of clear cutting and growing even-aged and -sized trees, has simplified the structure of boreal forests. Consequences include alterations in cultural ecosystem services such as forest attractiveness, i.e., combined aesthetic and recreational values. Continuous-cover forestry might mitigate these effects through the use of selection and gap cutting, but these methods have been little studied, particularly from the attractiveness viewpoint. We used photo surveys to assess Finnish citizens’ perceptions of attractiveness of in-stand scenery of Scots pine (Pinus sylvestris L.) forests logged using different methods. (i) The attractiveness scores, given by respondents, declined steadily from unharvested forest through continuous-cover methods to seed-tree and clear-cut methods. (ii) Respondents with a negative attitude to forest management gave lower scores than respondents with a positive attitude, but the declining slopes of attractiveness against logging intensity were similar. (iii) In unharvested and less intensively managed stands, summer photos received higher scores than corresponding winter photos. (iv) Background variables (gender, education, living environment, memberships in recreational or nature NGOs, forestry profession, and forest ownership) had negligible effects on the scores. We recommend the use of continuous-cover logging methods in settlement and recreational areas.

Recreation Conifer
https://www.sciencedirect.com/science/article/abs/pii/S0378112719315592
15/02/2020

Retention forestry implies that biological legacies like dead and living trees are deliberately selected and retained beyond harvesting cycles to benefit biodiversity and ecosystem functioning. This model has been applied for several decades in even-aged, clearcutting (CC) systems but less so in uneven-aged, continuous-cover forestry (CCF). We provide an overview of retention in CCF in temperate regions of Europe, currently largely focused on habitat trees and dead wood. The relevance of current meta-analyses and many other studies on retention in CC is limited since they emphasize larger patches in open surroundings. Therefore, we reflect here on the ecological foundations and socio-economic frameworks of retention approaches in CCF, and highlight several areas with development potential for the future. Conclusions from this perspective paper, based on both research and current practice on several continents, although highlighting Europe, are also relevant to other temperate regions of the world using continuous-cover forest management approaches.

Temperate Conservation Harvesting
http://www.sisef.it/iforest/contents/?id=ifor3183-012
05/02/2020

The conversion to uneven-aged, mixed-species stands represents one possible way to mitigate the consequences of disturbances in Norway spruce forests in Central Europe. A better understanding of the establishment and growth dynamics of the understory can contribute to a more effective conversion process. Here we investigate the structure of understory, light climate and growth of natural regeneration of Norway spruce and silver fir in two forest stands undergoing conversion to continuous cover forestry. Stand-wise forest inventory was conducted in 1993 and 2013. The natural regeneration was surveyed, and the light conditions and inter-tree competition were quantified in 51 sample plots established across the stands in 2013. Our results suggest that the diffuse radiation strongly affects the height growth of fir and spruce natural regeneration. We do not confirm the effect of local sapling density on the regeneration dynamics. The results further show that fir trees grow faster than spruce under less intensity of diffuse light. Most of the spruce and fir trees reached the upper limit of the lower overstory (DBH 12 cm) at approximately 50 years of age. Thus, more substantial reductions in stand density can lead to a well-differentiated structure in less than five decades. To control the prospective representation of spruce and fir in mixed-species forests undergoing the conversion, managing of light conditions is crucial.

Transformation Conifer Stand Structure